
AP Extreme Pressure (EP) NLGI-00 15Kg
Description
AP
Extreme Pressure (EP)
NLGI-00
Description
AP
Extreme Pressure (EP)
NLGI-00
Description
AP
Extreme Pressure (EP)
NLGI-00
Description
AP
Extreme Pressure (EP)
NLGI-1
Description
AP
Extreme Pressure (EP)
NLGI-2
Description
AP Lithium Complex (MP) Red NLGI-3 Grease 15 Kg is a semisolid lubricant formed as a dispersion of thickening agents in a liquid lubricant. Grease generally consists of a soap emulsified with mineral or vegetable oil.
A common feature of greases is that they possess a high initial viscosity, which upon the application of shear, drops to give the effect of an oil-lubricated bearing of approximately the same viscosity as the base oil used in the grease. This change in viscosity is called shear thinning. Grease is sometimes used to describe lubricating materials that are simply soft solids or high viscosity liquids, but these materials do not exhibit the shear-thinning properties characteristic of the classical grease. For example, petroleum jellies such as Vaseline are not generally classified as greases.
Greases are applied to mechanisms that can be lubricated only infrequently and where a lubricating oil would not stay in position. They also act as sealants to prevent ingress of water and incompressible materials. Grease-lubricated bearings have greater frictional characteristics because of their high viscosity.
Description
AP ST Transparent (MP) GREASE NLGI 3 is a light colour heavy duty
grease based on a Lithium-12-Hydroxy stearate
soap for long time lubrication under high load.
GREASE NLGI 3 is a relative rigid grease.
GREASE NLGI 3 is for the long-term lubrication of rolling and slide bearings, also appropriate in case of high loads.
GREASE NLGI 3 reduces wear thanks to its very good resistance to high pressure. GREASE NLGI 3 is good temperature-resistant.
* High-pressure resistant.
* Contains anti-wear additives.
* Absolutely water resistant.
* Corrosion protection, prevents rust and seizure.
* Good temperature-resistant.
Description
(High Temperature Grease)
Bentonite clay based grease capable of withstanding very high te mperature and has
excellent resistance to water washout and oxidation.
Description
Fuchs Renogel BHT is produced using
bentonite clay as a thickening agent in place of
the normal metallic soap of conventional
greases. This clay matrix will not melt and the
upper working temperature is therefore limited
by the physical properties of the oil. This
grease can operate satisfactorily at
temperatures of 2300C with very frequent
republication.
Benefit
Fuchs Renogel BHT has excellent resistance
to oxidation and high resistance to water
washout.
Application
Fuchs Renogel BHT may be used in the steel,
cement, brick and chemical industry where
operating temperatures are above the limits for
conventional soap based greases.
Fuchs Renogel BHT can be used in the
lubrication of plain and anti-friction bearings in
high temperature applications such as hot gas
fans and blowers, cement kilns, mill roll
bearings, moulding presses, laundry and dry
cleaning equipment, etc. It is available in NLGI
No. 3.
Product Characteristics
Properties Unit Value
NLGI Grade No.3
Thickener Type Bentone Clay
Worked penetration, 250C 60 stokes, typical 235
Dropping Point 0C Indefinite
Base Oil Viscosity, @ 400C cSt 480
Oxidation Stability bar, max 0.5
Description
RENOLIT FEP
(Extreme Pressure Grease)
Lithium based multipurpose gre ase having extre me pressure additives and can
withstand te mperature as high as 1200C.
Description
The Fuchs Renolit FEP greases are
multipurpose extreme pressure lithium based
greases with EP additives. They also contain
special inhibitors to increase aging stability and
anticorrosion properties. Fuchs Renolit FEP
greases have a very high resistance to
mechanical loads, minimize wear under heavy
and shock load conditions and give excellent
protection against water washout and rusting.
Fuchs Renolit FEP greases are available in
NLGI consistencies of 0,1,2 & 3.
Benefits
Fuchs Renolit FEP greases offer the following
benefits.
High temperature capability
Description
Gulf Crown EP series greases are multipurpose extreme pressure lithium soap based grease for use in a wide range of heavy duty on-road trucking and automotive applications as well as varied industrial applications. These are manufactured from highly refined base oils and performance additives to provide excellent wear protection, good structural stability, resistance to water washout and effective protection from corrosion. These greases are designed for the lubrication of rolling element and plain bearings such as those found in the steel, paper, mining, quarrying and construction industries. Gulf Crown EP greases are available in NLGI 00, 0, 1, 2 and 3.
Features & Benefits:
Effective extreme pressure properties for efficient lubrication of heavily loaded components
Improved mechanical stability and resistance to softening ensures long lubricant life and prevents leak out of bearings
Good corrosion protection and resistance to water washout resulting in improved component protection and equipment life
High drop point ensures extended operating range of up to 120ºC.
Applications:
Wheel bearing and chassis component lubrication applications in heavy duty trucking and automotive vehicles
General lubrication of axles, ball joints, universal joints, power take-offs, king pins, bushings and disc brakes
Heavy duty plain and rolling element bearings operating under severe conditions including shock loading in wet environments
NLGI 00 and 0 grease: Suitable for use in Centralized lubrication system that require semi-fluid greases.
Other automotive and industrial applications where such quality grease is required
Have questions about our products? Our team is ready to help you on WhatsApp!